Z250 Universal Light Curing Composite Dental Filling Resin
Z250 Universal Light Curing Composite Dental Filling Resin
ATbio

Z250 Universal Light Curing Composite Dental Filling Resin

  • REF: N/A
$7.20
spec: A1
Ask a Question

Estimate delivery times: 5-12 days (International).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Z250 Universal Light Curing Composite Dental Filling Resin
ATbio
Z250 Universal Light Curing Composite Dental Filling Resin
$7.20

Z250 Universal is a micro-filled composite resin for general use in anterior and posterior tooth restorations.This dental restorative material is available in 19 shades, it takes into account the two needs of natural beauty and dental restoration,providing a reliable solution for various clinical restoration needs.

Advantages

  • Outstanding mechanical properties, including compressive strength, flexural strength, radial tensile strength, fracture toughness, etc. Inorganic filler volume percentage 78.4%, particle sizedistribution 0.04-3.0μm.Curing depth ≤3mm, easy curing, non-stick instruments, easy plasticity.
  • All aspects of performance are close to natural teeth.
  • Layered filling and shaping to perfectly simulate natural tooth color and transparency.
  • Good non-stick properties and beautiful surface gloss.
  • Applicable to all bonding systems on the market.
  • Low shrinkage stress. Polymerisation shrinkage rate <2.2%.
  • Excellent color stability.

1. Cavity Preparation
1.1 Anterior Restorations Use Conventional Cavity
Preparations for all class III, IV and class V restorations.

1.2 Posterior Restorations
Prepare the cavity. Line and point angles should be rounded. No residual amalgam or other base material should be left in the internal form of the preparation that would interfere with light transmission and therefore, the hardening of the restorative material.

2. Pulp Protection
If a pulp exposure has occurred and if the situation warrants a direct pulp capping procedure, use a minimum amount of calcium hydroxide on the exposure.

3. Placement of Matrix

3.1 Anterior Restorations
Mylar strips and crown forms may be used to minimize the amount of material used.

3.2 Posterior Restorations
To establish the better contour, dead-soft metal, Mylar, or other forming device are advised.

4. Adhesive System
Follow the manufacturer’s instructions, applying the adhesive.

5. Dispensing the Composite
Follow the directions corresponding to the dispensing system chosen.
Dispense the necessary amount of restorative material from the syringe onto the mix pad by turning the handle slowly in a clockwise manner. Then fill the material into the cavity.

6. Curing
NanoFil® dental filling resin is intended to be cured by exposure to a halogen or LED light with a minimum intensity of 400 mW/cm2. Cure each increment by exposing its entire surface to a high intensity visible light source, hold the light as close to the restorative as possible during light exposure. The recommended exposure time and maximum increment thickness for each shade is shown below.

7. PolishingPolish with finishing and polishing system.

Caution
In case of deep cavities, we recommend covering the dentine near the pulp with a calcium hydroxide preparation and a base (e.g. glass ionomer cement) prior to etching.
Do not store materials in proximity to eugenol containing products.
Disinfect the products using an intermediate level disinfection process

Storage conditions
Store at temperatures of 2~25°C (36~77°F).

Expiration Date and Batch Number
See note on syringe/packaging.

Warranty
3 years

This product is covered by a 12-month limited warranty effective from the date of purchase.

Our warranty applies to defects in materials and workmanship under normal clinical use.

What’s Included

  • Repair or replacement for manufacturing defects
  • Technical support during the warranty period
  • Assistance with spare parts if required

Not Covered

  • Damage caused by improper operation or unauthorized repairs
  • Wear-and-tear from regular use (e.g., consumables, tips, O-rings)
  • Damage from improper storage, sterilization, or chemical exposure

How to Claim
Please contact our customer support team with your order number, issue description, and product photos. We will respond within 1–2 business days to arrange assistance.

Returns will be accepted for up to 30 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:

– Received the wrong item.
– Item arrived not as expected (ie. damaged packaging).
– Item had defects.
– Over delivery time.
– The shipper does not allow the goods to be inspected before payment.

The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.

Global Brands

450+ International Brands

Authenticity Guarantee

100% Authorized Sourcing

Best Value Pricing

Competitive Offers For Clinics

30-Day Return Support

Hassle-Free Service Guarantee

Related Products

Recently Viewed